BOWL LIFT CYLINDERS REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Remove two bolts (16), washers (17) and mending plate (18) from top of bowl lifting cylinder (4).
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause death or injury.
Weight of bowl lifting cylinder is 270 lb (123 kg.).
Use lifting device to remove pin (14), bowl lifting cylinder (4) and sleeve bearing (15).
Remove lifting device from bowl lifting cylinder (4).