ENGINE ASSEMBLY REPLACEMENT - CONTINUED
Use caution when handling heavy parts. Provide adequate support and use two assistants during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
Use care not to damage surrounding hoses, harnesses and components.
Weight of engine assembly is 3,150 lb (1,429
Use lifting device to lift engine assembly and install in
engine compartment. Use pry bar to align front and
Install two caps (54), four washers (53) and bolts (52)
on rear mounting of engine assembly. Torque bolts to
185 lb-ft (84 Nm).
Install four washers (51) and bolts (50) to front mount-
ing on engine assembly.