VALVE BRIDGES REPLACEMENT - CONTINUED
Use clean oil to lubricate bridge mounting dowel.
Use clean oil to lubricate exhaust valve bridge assembly and intake valve bridge assembly.
Adjustment screw on bridges face toward exhaust manifold.
Install exhaust valve bridge assembly and intake valve
Valves must be fully closed before bridge
assembly adjustment can be performed.
Seat exhaust valve bridge assembly and intake valve
bridge assembly. Apply downward force with finger to
make contact with valve stem opposite adjustment
Turn screws (4 and 8) clockwise until screws (4 and 8)
make contact with valve stems. Turn screws (4 and 8)
an additional 1/3 clockwise turn. Hold.
Tighten nuts (3 and 1) to 22 lb-ft (30 Nm).
END OF WORK PACKAGE
0266 00-3/-4 Blank