TM 5-3805-248-23-2
ENGINE OIL COOLER REPLACEMENT - CONTINUED
0269 00
REMOVAL - CONTINUED
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
NOTE
Weight of the oil cooler assembly is 52 lb
(24 kg).
7.
Attach lifting device to engine oil cooler assembly.
8.
Remove two bolts (15) and gasket (11). Discard gas-
ket.
9.
Remove two bolts (12), elbow (13) and gasket (14).
Discard gasket.
10.
Loosen four clamps (16).
11.
Use hoist and sling to remove engine oil cooler assem-
bly.
11
12
16
13
ENGINE
OIL COOLER
14
15
394-662
12.
Remove lifting device.
18
13.
Remove four clamps (16).
19
17
14.
Remove two clamps (24).
20
15.
Disconnect two hoses (25) from bonnet (17).
21
16.
Remove bonnet (17) from core assembly (19).
22
17.
Remove and discard seal (18).
23
18.
Remove bonnet (23) and preformed packing (22) from
adapter (21). Discard preformed packing.
24
19.
Remove adapter (21) and seal (20) from core assem-
bly (19). Discard seal.
25
16
394-663
0269 00-3