TM 5-3805-248-23-2
AFTERCOOLER REPLACEMENT
THIS WORK PACKAGE COVERS
Removal, Cleaning and Inspection, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts - Continued
Direct Support
Tools and Special Tools
Gasket (8)
Tool kit, general mechanic's (Item 113, WP 0338
References
Lifting device, 150 lb (68 kg) minimum capacity
WP 0047 00
Materials/Parts
TM 5-3805-248-10
Equipment Condition
Coolant drained (WP 0042 00)
Coolant filter and brackets removed (WP 0051 00)
REMOVAL
WARNING
Use extreme caution when handling heavy parts. Provide adequate support and use assistance during proce-
dure. Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may result in death or injury to
personnel.
CAUTION
Wipe area clean around all connections to be opened during removal and disassembly. Cap oil lines and plug
openings after removing lines. Contamination of engine lubrication system could result in premature failure.
NOTE
Aftercooler weighs 95 lb (43 kg).
Tag lines prior to removal to ensure correct installation.
Use container to capture draining fluids. Dispose of fluids IAW local policy and ordinances. Ensure all
spills are cleaned up.