SHIFT POINT ADJUSTMENT - CONTINUED
ADJUSTMENT - CONTINUED
Remove four plugs (4) at taps A, B, C and D.
Install transmission hydraulic test group at taps A, B, C and D.
Remove four plugs (3) at taps E, F, G and H.
Operate engine and let transmission oil get to normal operating temperature (TM 5-3805-248-10).
Put transmission selector lever, at operator console, in 2nd speed position and run engine at 1,500 RPM.
Check supply oil to governor at test location A. Pressure should be 85-94 psi.
If supply pressure for governor is not in tolerance, turn adjustment screw (E) to get correct pressure.