TRANSMISSION REPLACEMENT - CONTINUED
Wipe area clean around all connections to be opened during removal and disassembly. Cap lines and plug
openings after removing lines. Contamination of hydraulic system could result in premature failure.
Tag all hose and tube assemblies prior to disconnecting to ensure correct installation.
Use a container to capture any oil that may drain from lines. Dispose of oil IAW local policy and ordi-
nances. Ensure all spills are cleaned up.
Steps 1 through 4 are for the removal of shaft from the left wheel. Removal of shaft from the right wheel is
Remove two bolts (1) and washers (2) from inner wheel well.
Remove cover (3), shim (4) and preformed packing (5). Discard preformed packing.
Remove pin (6).