TRANSMISSION REPLACEMENT - CONTINUED
REMOVAL - CONTINUED
Remove two nuts (30) and washers (31).
Remove cover plate (27) assembly.
Remove differential filler (33) and gasket (32). Discard gasket.
Install link bracket into top of transfer case.
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
Weight of retarder transmission is 4,500 lb (2,041 kg).
Place hydraulic floor jack under retarder oil cooler assembly for support.
Attach lifting device to 3/4-10NC link bracket and to front lifting eye.