TM 5-3805-248-23-2
TRACTOR WHEEL AND TIRE MAINTENANCE - CONTINUED
0302 00
REMOVAL - CONTINUED
5.
Remove six bolts (1) and lock wire.
2,3
6.
Remove ring (2) and shim(s) (3). Tie shim(s) (3)
together and tag for identification.
1
394-419
LOCK WIRE
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Gear and internal gear assembly weighs 200 lb (91 kg).
7.
Position link bracket on inside of gear (5) assembly.
8.
Use lifting device to remove gear and internal gear (5)
assembly from tire and wheel assembly.
9.
Place gear and internal gear (5) in a work area and
remove lifting bracket.
10.
Remove cone bearing (4) from tire and wheel assem-
bly.
4
5
394-421
0302 00-3