TIRE REPLACEMENT - CONTINUED
Deflate tire completely before unseating tire bead from rim. Failure to follow this procedure may cause
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause injury or death.
Eye protection must be worn during maintenance where components or particles could fly out during
procedure. Failure to take precautions could cause injury.
Raise machine using 20-ton jack and support on jack stand.
Remove valve stem core (6) and COMPLETELY deflate tire.
Use pneumatic bead breaker to break both inside and outside tire beads.
Push tire (5) and flange assembly (1) inward and remove lock tab (2), lockring (3), and preformed packing (4). Discard
Remove flange (1).