TM 5-3805-248-23-2
HYDRAULIC STEERING SERVO-SENDER CYLINDER REPAIR - CONTINUED
0309 00
ASSEMBLY - CONTINUED
22.
Install new locknut (14) on rod assembly. Torque lock-
ROD
nut (14) to 35 lb-ft (47 Nm).
ASSEMBLY
23.
Use clean lubricating oil to lubricate piston (19), two
new preformed packings (22) and new preformed
14
packing (23).
24.
Remove rod assembly from soft-jawed vise.
22
23
19
394-951
25.
Fasten cylinder assembly in a soft-jawed vise.
ROD
26.
Install rod assembly in cylinder assembly. Ensure rod
ASSEMBLY
is fully extended.
13
27.
Install four bolts (13).
CYLINDER
ASSEMBLY
394-938
28.
Install two new preformed packings (11) and plugs
2
12
12
(12) in valve body (2).
29.
Install two balls (5), retainers (6), springs (7), shims
(8), new preformed packings (9) and plugs (10).
Torque plugs to 42 lb-ft (57 Nm).
11
30.
Install two bleeder valves (3) and new preformed
packings (4).
10
3
5
6
4
7
394-937
8
9
0309 00-10