TM 5-3805-248-23-2
HITCH LINKS MAINTENANCE - CONTINUED
0313 00
INSTALLATION - CONTINUED
9.
Install washer (16) in draft frame.
10.
Install lifting device on link (7) and install on
15
machine.
11.
Apply a thin coat of grease to pin (15) and install on
machine.
16
7
394-987
12.
Install two yokes (9), four washers (10) and bolts (11).
6
13.
Remove lifting device from link (7).
7
14.
Connect rod end of steering cylinder (8) to links (3
and 7).
15.
Remove support from steering cylinder (8).
16.
Apply a thin coat of grease to pin (6) and install in
links (3 and 7).
17.
Install two yokes (12), four washers (14) and bolts
(13) in link (7).
18.
Lubricate steering cylinders and link bearings (TM 5-
8
3805-248-10).
3
14
9
12
394-986
10
13
11
0313 00-6