TM 5-3805-248-23-2
EJECTOR GUIDE ROLLER MAINTENANCE
THIS WORK PACKAGE COVERS
Removal, Disassembly, Cleaning and Inspection, Assembly, Installation
INITIAL SETUP
Maintenance Level
Materials/Parts - Continued
Gasket
Direct Support
Seal
Tools and Special Tools
Equipment Condition
Machine parked on level ground (TM 5-3805-248-
Tool kit, general mechanic's (Item 113, WP 0338
10)
Parking/emergency brake applied (TM 5-3805-248-
Materials/Parts
10)
Engine shut down (TM 5-3805-248-10)
Bowl lowered to the ground (TM 5-3805-248-10)
Battery disconnect switch in OFF position (TM 5-
3805-248-10)
NOTE
The following maintenance procedure is
for the right ejector guide roller. The main-
tenance procedure for the lower left ejec-
tor guide roller is identical.
REMOVAL
1.
Remove nut (2), bolt (3) and washer (4) mounting
ejector guide roller to ejector.
2
2.
Use a soft hammer to tap shaft (5) until loose. Rotate
1
clockwise until there is clearance between ejector
guide roller (1) and rail.
5
3.
Remove ejector guide roller (1).
4
3
394-1459