GOVERNOR CUTOFF VALVE REPAIR - CONTINUED
Use care to keep dust, dirt and other contaminants out of governor cutoff valve. Ensure hands, clothing and
tools are clean. Do not assemble governor cutoff shaft valve where wind may carry airborne particles. Fail-
ure to follow this caution may result in damage to equipment.
Install four balls (4) in governor cutoff valve body (8).
Install spring (5), new O-ring (6) and plug (7) in governor cutoff valve body (8). Torque plug to 35 lb-ft (47 Nm). Match
color code of spring (5).
Apply a coat of clean lubricating oil to spool (3) and install in governor cutoff valve body (8).
Always wear eye protection when removing parts under spring tension. Remove restraining parts slowly to
relieve spring pressure. Failure to follow this warning may result in injury.
Install new O-ring (2) and plug (1) in governor cutoff valve body (8). Torque plug to 35 lb-ft (47 Nm).
Operate machine to verify correct transmission operation (TM 5-3805-248-10).
END OF WORK PACKAGE
0365 00-3/-4 Blank