TM 5-3805-248-23-2
TORQUE CONVERTER MAINTENANCE - CONTINUED
0371 00
ASSEMBLY - CONTINUED
23.
Install carrier support (9) and retaining ring (10) on
hub body (11).
10
9
11
394-1250
INSTALLATION
1.
Install two link brackets (5) in carrier support (9).
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may cause injury or death.
NOTE
Torque converter assembly weighs 300 lb (136 kg).
2.
Attach lifting device to two link brackets (5).
0371 00-16