TM 5-3805-248-23-2
SUPPLEMENTAL STEERING PUMP REPAIR - CONTINUED
0379 00
ASSEMBLY - CONTINUED
22.
Use snap ring pliers to install snap ring (47) on orifice (57) in valve body (4).
23.
Use new setscrew kit to install new setscrew (50), new seal (51), locknut (52), new seal (53) and acorn nut (54). Set-
screw (50) must be in alignment with hole in orifice (57) in valve body (4).
24.
Install two new preformed packings (56) in groove of two new back-up rings (55).
25.
Install two new back-up rings (55) on lip of protruding bearing insert on flow control valve side of valve body (4).
26.
Install eight studs (48) with short studs on side of flow control valve. Apply sealing compound to threads of eight studs
(48).
27.
Install eight studs (49). Apply sealing compound to threads of eight studs (49) being installed.
28.
Lubricate eight studs (49).
48
47
57
49
56
55
4
50
53 52 51
54
394-1527
29.
Install two new preformed packings (45) in groove of
5
two new back-up rings (46).
30.
Install two new back-up rings (46) on bearing insert in
front body (5).
46
45
394-1759
0379 00-15