TM 5-3805-248-23-2
APRON LIFT MECHANISM MAINTENANCE - CONTINUED
0387 00
REMOVAL - CONTINUED
2.
Remove bolt (4) and washer (5) from pin (3) at bottom of link (2).
WARNING
Use caution when handling heavy parts. Provide adequate support and use assistance during procedure.
Ensure that any lifting device used is in good condition and of suitable load capacity. Keep clear of heavy
parts supported only by lifting device. Failure to follow this warning may result in death or injury to person-
nel.
NOTE
Weight of link is 105 lb (48 kg).
3.
Attach lifting device to link (2) and tighten to remove any slack in line.
WARNING
If pin removal is difficult, slightly raise or lower lifting device to relieve pressure on pin. Do not try to
remove pin by using a hammer. Failure to follow this procedure may cause injury or equipment damage.
4.
Remove pin (3).
2
5
4
3
394-1468
0387 00-3