Every 500 Service Hours or 3 Months
Clean and install the fill cap.
Start the engine and operate at low idle to allow the
hydraulic oil to circulate.
Stop the engine.
Hot oil or components can cause personal injury.
Do not allow hot oil or components to contact skin.
The machine must be level. The bowl must be lowered.
Apply the parking brake. Stop the engine.
Remove the cover and element assembly.
Keep the oil level between the ADD and FULL
marks on the sight gauge.
Remove the filter drain plug. Allow the oil to drain.
Remove the retaining nut and the retainer. Remove
the used filter element. Wash the cover and retainer in
clean non-flammable solvent. Allow them to dry.