Replace any damaged seals.
Contact Organizational maintenance for assembly
and installation of the wheel and brake. Also for wheel
bearing preload adjustment.
After the wheel and brake are installed, contact
Organizational maintenance to bleed the brakes.
Always inspect the cooling system with the engine
Remove the filler cap slowly to relieve pressure.
Steam can cause personal injury.
The machine must be level. The bowl must be lowered.
Apply the parking brake. Stop the engine. Remove the
Maintain the scraper master cylinder oil level to the
bottom of the fill plug opening. Remove the plate for
master cylinder plug access.
If the machine is to be shipped to or stored in an
area with freezing temperatures, the cooling system
must be protected to the lowest expected outside
temperature or drained completely.
Check antifreeze in accordance with the procedures in
Remove the radiator cap slowly to relieve pressure.