Remove the auxiliary fuel tank from the rear
Be sure the emergency brake is set when
running the engine.
Hearing protection must be worn when running
Start the engine. Raise the bowl to the fully
Move the ejector back to the rear of the bowl.
Connect the spring assembly to cables. Connect
cables to lugs on back of ejector and to lugs o the
steering axle. Bring the ejector forward until the
spring assembly starts to stretch.
Ejector may drift under the weight of the steer
axle. Slight pressure on the ejector control
lever will help to keep the ejector in place.
Remove the bolts securing the steering axle to
the storage brackets.