TM 5-3805-260-10
(11) Remove muffler and muffler guard from ejector
and install on tractor.
b.
Reconnection.
(1)
Unstrap lift cylinders and lay on ground.
Remove the draft pins from the scraper holes.
WARNING
Hearing protection must be worn while running
the engine.
(2)
Move the transmission restraint lever to the
sectionalization position and start engine.
NOTE
The screw jack can be used to tip the draft
frame from side to side, to facilitate the pin
insertion.
(3)
Carefully backing the tractor section, align draft
frame arms into the bowl connection area. Insert
drift pin to facilitate hole alignment.
3-33