Lower oscillation control plates on each
side of the steer axle.
Lower stabilizer skid pad. Remove the
bolts holding the steering axle to the front belly pan.
Start the engine and lower the bowl to raise the front of
the tractor to provide clearance for steering axle removal.
Roll the steering axle out from under the tractor and
STOP THE ENGINE.
Use two people to roll axle to storage position
on rear of bowl.
Position the steering axle bar into the
lower hooks on the rear frame. Start the engine and
move the ejector back to rear of bowl.
Connect the spring assembly with
cables to steer axle and ejector.
Spring bar may catch on battery or fuel tank
storage brackets and cause cable to break
free. Stand clear until axle is in attaching
Before raising steering axle, be sure bowl is in
fully raised position.