Adjustment Of Axle Loading. The following steps describe how to change the loading of the load transfer axle, if
Position scales under each load transfer
axle wheel. Carefully lower axle onto
scales. Observe indicated scale load.
Remove the protective cap from the load
transfer axle control valve. Loosen locknut
on adjustment screw.
While watching the indicated scale load,
turn adjustment screw counterclockwise to
increase or clockwise to decrease axle
loading until desired load is achieved.
Tighten locknut on adjustment screw.
Install protective cap on control valve.
Lift load transfer axle and remove scales.
Lower load transfer axle and bowl.