BELT TIGHTENER (AIR COMPRESSOR)
Use tool (A) to remove ring (3) that holds the
bearing and shaft (5) in pulley (1).
Remove shaft (5) and the bearing from pulley
(1) by hand. Remove the shaft from the bearing.
If necessary use tool (A) and remove the other
ring that holds the bearing and shaft (5) from
ASSEMBLE BELT TIGHTENER
Put the bearing and shaft in position in pulley
(2). Install rings (1) with tool (A) on each side of
pulley (2) to hold the bearing in position.
Put pulley (2) and the shaft in position on
bracket (3) and use a press to install the shaft in
Install cover (4) on the pulley.
install belt tightener