CRANKCASE VENTILATOR VALVE
ASSEMBLE CRANKCASE VENTILATOR
Put 5H2471 Gasket Cement on both sides of
gasket (2). Install the gasket on housing (1).
Install inner sleeve (3) in the housing.
Put piston (6) in position next to the side of
diaphragm (4) that has identification "PISTON
Put retainer (5) in the diaphragm.
Put the screw through sleeve (7), retainer,
diaphragm, and the piston.
Install spacer (8), washer, and nut (9) on the
Put 5H2471 Gasket Cement on the contact
surfaces of the diaphragm. Install the sleeve,
retainer, diaphragm, and piston in the inner
sleeve and housing.
8. Put the spring and cover in position on the housing
and install the screws that hold the cover in place.