ELECTRIC FUEL PUMP 613BSSI AND 613BSNS1
REMOVE AND INSTALL ELECTRIC FUEL
Remove the back-up alarm and cover from the
scraper as an assembly. The weight of this
assembly is 135 lbs (61 kg).
Disconnect the brown electrical lead (2) and the
black electrical lead (3) at the fuel pump (4)
NOTE: Use a small container to catch any fuel remaining
in the fuel lines as the fuel pump is removed.
Disconnect the fuel pump inlet (5) and outlet (6)
fuel lines. Plug the fuel inlet line (5) with a plug.
Remove nut (7), washer (8), and bolt (9) from
clamp (10). Push fuel pump (4) out of clamp
(10). If the fuel pump cannot be easily removed
from the clamp, remove bolt (11), washer (12),
and clamp (10) with the fuel
If removed, install clamp (10) with bolt ( I1) and
Position fuel pump (4) in clamp (10) and secure
with bolt (9), washer (8) and nut (7).
Connect fuel pump outlet (6) and inlet (5) fuel
lines to the fuel pump.
Connect electrical leads (3) and (2) at the fuel
pump (4) connectors.
After installing pump, check for leakage of fuel
at the pump fittings.
Install back-up alarm and cover as an assembly.