TM 5-3805-260-24
FLYWHEEL
(1) Flywheel shoulder.
(2)
Install ring gear so that part No is on this side Ring gear must be
assembled against shoulder of flywheel.
NOTE Do not heat ring gear to more than 400 °F (204°C)
before
installing on flywheel.
(3) Pilot bore.
(4)
Torque for bolts holding flywheel to
crankshaft..................................55 5 lb. ft. 175 - 7 N·m)
Put 5P3413 Sealant on the bolt threads.
NOTE: Dash mark on flywheel must be in alignment with dash mark on
crankshaft..
1-28