TM 5-3805-260-24
FINAL DRIVES
REMOVE FINAL DRIVES
Tools Needed
A
FT121
Lifting Bracket
1
start b):
a) remove axles
NOTE: Rim and tire removed for better photo
illustration.
I.
Remove bolts (I ) that hold the final drive
carrier to the wheel assembly.
2.
Use tool (A) and fasten a hoist to final drive.
3.
Install two "/2-13 NC forcing screws into
final drive carrier (2).
4.
Remove final drive. Weight of the final drive
is 85 lb.(39 kg).
INSTALL FINAL DRIVES
Tools Needed
A
FT121Lifting Bracket
1
I.
If necessary make a replacement of the O-
ring seal in the wheel assembly.
2.
Use tool (A) and fasten a hoist to final drive.
3
.Put the final drive in position on the
machine.
4.
Tighten the bolts to a torque of 195 18 lb.
ft. (265
24 N. m).
end by:
a)
install axles
3-147