TM 5-3805-260-24
TRANSMISSION
8.
Remove guide pins (3) and remove selector valve (9).
NOTE:
See
DISASSEMLE
TRANSMISSION
HYDRALULIC
CONTROL VALVES to disassemble the pressure control and
selector valves.
9.
Remove ring (13) from sleeve (12).
10.
Push sleeve (12) down and out of manifold (10).
11.
Remove bolts (11) and remove manifold (10).
12.
Remove sleeve (12).
13.
Remove the ring that holds No. 1 clutch assembly (15) in
position from shaft assembly (14).
14.
Install two 3/8"-16 NC forged eyebolts in No. 1 clutch
assembly (15).
15.
Fasten a hoist and remove clutch assembl) (15). Weight of
the clutch assembly is 60 lb. (27 kg).
16.
Remove the eyebolts from the clutch assemby and remove
coupling (16) from piston (17).
17.
Remove bearing race and roller assembly (18) from the
inside of coupling (16), with tooling (A).
3-196