AIR DRYER (613BSNS1, 613BSS1)
DISASSEMBLE AND ASSEMBLE
Put the machine on level ground. Lower all equipment to
the ground, put blocks in front and in back of the wheels
so the machine cannot move. Shut off the engine.
Remove all of the air pressure from the air reservoirs and
air system. Make sure the lines to and from the air dryer
are at atmospheric pressure.
Disconnect the unloader line from the end cover of
the air dryer. Disconnect the wire at the air dryer.
NOTE: To better show the disassembly and assembly of the air
dryer, it has been removed from the machine.
Loosen the bolts (I) and turn the clamps (2) 90" as
Push in on end cover assembly (5).
Put a screw driver in notch (3) and remove snap ring (4).
Remove end cover assembly (5).