Disconnect hose assemblies (18) from the tank.
Remove the two bolts and washers to disconnect tube
assembly (17) from the rear of the tank.
Disconnect hose assembly (16) from angle assembly
(19) under the hitch and pull the hose assembly to the
Remove one bolt (20) from each side of the tank that
holds the filter group to the tank. Install two 7/16"-14 NC
forged eyebolts in the top of the tank.
Fasten a hoist and remove the tank. Weight of the tank
is 210 lb. (94.5 kg).
NOTE: The tank must be lifted at a small angle so the flange on
tube assembly (17) will not hold the tank.
INSTALL HYDRAULIC TANK
Install two 7/16"-14 NC forged eyebolts in the top of tank
(1). Fasten a hoist and put tank (1) in position on the