TM 5-3805-260-24
HITCH
2. Install front and rear horizontal pins.
3. Install the washer and nut (4) on the rear horizon-
tal pin. Tighten the nut with tooling (A) to a
torque of 375 to 425 lb. ft. (510 to 580 Nm).
4. Put bracket (6) in position and install bolts (7) to
the elevator control valve. Put the control cable
in position and install pin (5) and cotter pin.
5. Install washer (8) and bolts to the front horizontal
pin. Install blocks under each side of the hitch
and remove the hoist.
3-315