Connect tachometer cable (10) to the engine. Connect
water temperature sensing unit (9) to the engine.
Connect wire (11) to the solenoid. Install angle bracket
(12) tot he timing cover housing and make reference to
TM 5-3825-226-10 for the correct adjustment to the belt.
Lower the cab and install two bolts (13) and nuts to the
cab. Install bracket (14) to the rear bolt for the jack.
Remove the jack from the frame and install it on bracket
(14) as shoe n.
NOTE: Make sure the jack is put on the bracket before the
machine is moved. The hitch will hit the jack if not removed from
Install panel assembly (16). Put cables (15) in
through the holes in the cab.
Install the four bolts that connect the fender and