REMOVE SCRAPER WHEEL ASSEMBLIES
BEARING AND SEALS
Bearing Cup Puller
Ratchet Box Wrench
Bearing Puller Attachment
a) remove scraper rim and tire
b) remove brake head assemblies
Remove cover (1) from the wheel assembly.
Bend the tab of the lock from the nut and use tool (A) to
remove the two nuts and lock that hold the wheel assembly to
Remove the six bolts (2) and lockwashers that hold the plate
to the hub assembly.
Fasten a hoist to the wheel assembly.
Use two 5/8"-11 NC forcing screws or bolts approximately 4 in.
(101.6 mm) long and two spacers to push the wheel assembly
from the axle. Remove the wheel assembly. The weight of the
wheel assembly is 225 lb. (101 kg).