TM 5-3805-260-24
ELEVATOR CONTROL VALVE
7. Install gasket (9) and retainer (8) on the body.
8. Install spacer ( 1), spring (12), spacer (13) and
detent (14) on valve spool (10). Install bolt (15).
9. Install valve spool (10) in the body.
10. Install gasket (16) and housing (17) to the body.
11. Install four seals (18) in the body.
12. Install four plugs (19) in housing (17). Tighten
the plugs to a torque of 42 + 4 lb. ft. (58 + 5
N. m).
end by:
a) install elevator control valve
4-107