ELEVATOR SPEED SELECTOR VALVE
INSTALL ELEVATOR SPEED
Put speed control valve (3) in position and install
bolt (4). Do not tighten bolt. Install hose (2) and
bottom tube (I) on the valve.
Install top tube (5) on the valve.
Install bolt (6) on the valve. Put the control cable
in position and install pin (7). Install the cotter
pin through the pin.
Install control cable bracket (8) between valve
and frame. Put the control cable in notch of the
bracket and tighten the nut.
Move the support angle in position and install
four nuts (9) and connect four hoses (10).
Put hose (I) in position and install the four bolts
to hold it in position.