ELEVATOR SPEED SELECTOR VALVE
ASSEMBLE ELEVATOR SPEED SELECTOR VALVE
Retaining Ring Pliers
NOTE: Make sure all of the parts of the speed selector valve are
clean and free of dirt and foreign material. Put clean hydraulic
oil on all of the parts of the valve.
Install seal (2) and washer (1) in the valve as shown.
Install O-ring seal (3) on plug (4).
Install the plug in the valve.
Install O-ring seal (6) and washer (5).
Turn the valve as shown and install O-ring seal (8) and
Install valve spool (9) in the valve. Install ring (10) on
valve spool (9) with tool (A). end by:
Position seal (11) on spool (9) and install washer (12)
and screw (13).
install elevator speed selector valve