TM 5-3805-260-24
ELEVATOR CHAIN ADJUSTMENT ROLLER
5.
Remove bearing cup (7) and the ring (lock) which is under the bearing cup.
6.
After the ring is removed. Remove the bottom bearing cup (8).
ASSEMBLE ELEVATOR CHAIN ADJUSTMENT ROLLER
Tools Needed
A
1P510
Driver Group
1
1.
Install bearing cup (2) in the roller. Put the bearing cup below the
groove for the ring. Install ring (I) in the groove of the roller.
2.
Install bearing cup (4) in the roller and against the ring. Make sure
both bearing cups are against the ring.
3.
Install bearing cone (3) in the roller.
4.
Install the seal with tooling (A). Install the seal with the lip of
the seal to the inside of the roller.
4-140