TM 5-3805-260-24
ELEVATOR
REMOVE ELEVATOR
Tools Needed
A
1P510
Driver Group
1
1.
Fasten a hoist to elevator hydraulic motor (3) and
remove two bolts (1).
2.
Remove bolts (2) from the bracket. Slide the motor
out of the speed reducer and lower the motor over
the side of the bowl.
3.
Fasten a hoist to guard (4) and remove six bolts
(5). Remove the guard.
4.
Fasten a hoist to the elevator frame. Fasten a
chain from the hoist to the lower shaft.
5.
Remove four bolts (5) and the shims.
6.
Remove bolts (6), plate (7) and shaft (8) from the
bracket. Remove bracket (9).
7.
Do Steps 5 and 6 to remove the bracket on the
other side.
4-146