TM 5-3805-260-24
EJECTOR REAR GUIDE ROLLER
REMOVE EJECTOR REAR
GUIDE ROLLER
Tools Needed
A
1P765
Seal Guide
1
1.
Put the ejector in full forward position.
2.
Fasten a hoist to the lifting eye on top of the
ejector.
3.
Remove bolts (I) and plate (2) from both sides
and remove pin.
4.
Remove the rear cover assembly. See REMOVE
EJECTOR CYLINDER for this operation.
5.
Move the ejector forward with hoist until guide
rollers (4) are out of their tracks.
6.
Remove nuts (3) from the guide rollers.
7.
Remove guide rollers (4) from the ejector.
8.
Remove key (5) from the guide roller.
9.
Remove ring (6) that holds the bearing in the
guide roller.
4-160