TM 5-3805-260-24
EJECTOR CARRIER ROLLER
REMOVE EJECTOR CARRIER ROLLER
Tools Needed
A
1P510
Driver Group
1
1.
Fasten a hoist to the lifting eye on the top of the ejector.
Lift the ejector to permit the roller to be removed.
2.
Remove bolt (2) and the washer from the roller.
Remove roller (1) from the shaft.
3.
Remove nut and bolt (4) from the roller bracket. Make
the opening in the bracket large enough to remove roller
shaft (3). Remove the shaft.
4.
Remove washer (5) and the key from shaft (3). Remove
pin (6) from the front of the shaft.
5.
Remove bushing (7) from roller (1).
4-163
VIEW FROM UNDER MACHINE 1