TM 5-3805-260-24
EJECTOR CYLINDER
ASSEMBLE EJECTOR CYLINDER
Tools Needed
A
B
C
D
E
1P510
Driver Group
1
1P2852
Spanner Wrench
1
5P3520
Spanner Wrench
1
FT1344
Handle
1
2P2257
Extension
1
2P2258
Adapter
1
2P8343
Torque Multiplier
1
8H8541
Socket
1
1P2854
Spanner Wrench
1
1.
Install seal assembly (2) on piston (3) with the rubber
expander ring under the plastic seal ring.
2.
Install seal rings (1) on piston (3) with the openings (joint)
of the rings 180° apart.
3.
Install the back-up ring and O-ring seal (7) on head (6)
with the back-up ring toward the threads on the head.
4.
Install washer (5) and packing (4) in the head.
5.
Install the wiper in gland assembly (8) with tooling (A) with
the lip of the seal toward the outside when installed.
6.
Install gland assembly (8) in the head and tighten the
gland assembly with tool (B).
7.
Install the head, the spacer and piston on the rod.
4-171