SLIDING FLOOR CYLINDER
Turn the head over as shown. Remove O-ring
seal (12) and the ring from the head.
Check the condition of the parts of the cylinder.
If the parts have damage, use new parts for
ASSEMBLE SLIDING FLOOR
Make sure all of the parts are clean and free of
dirt and foreign material. Put clean hydraulic oil
on all of the parts of the cylinder.
Install ring (3) and O-ring seal (I) on head (2).
The ring must be toward the outside of head
Turn the head over as shown. Install packing (4)
Install the seal in retainer (5) with tooling (A).
Install the seal with the lip of the seal toward the
outside of the retainer.
Install shims (6) and retainer (5) on head (2).
Install the bolts hut hand tighten only.