TM 5-3805-260-24
Disassembly and Assembly
Steering Cylinder
7. Remove O-ring seal (6) and the backup ring from cap
(4).
8. Remove ring (7) and seal (8). Remove the backup
ring from under seal (8).
9. Remove bearing (9) from the cylinder rod if damaged.
Assemble Steering Cylinder
Tools NeededAB
1P510Driver Group1
1P520Driver Group1
1. install bearing (1) in cylinder rod with tool group (A).
Install the bearing with the hole in the bearing in
alignment with the hole for the grease fitting.
2. Install the backup ring, seal (3) and ring (2) on the
cylinder rod.
5-14