Disassembly and Assembly
Put tape around the threads of steering knuckle
to give protection to the threads when the steer
wheel is removed.
Remove steer wheel (5) with two persons.
Weight of the steer wheel is 54.4 kg (120 lb.).
Be extra careful not to cause damage to the threads on
the steering knuckle.
Remove inner bearing cone (6) with the seal
from the steering knuckle.
Make an inspection of the inner and outer
bearing cups (7). If a replacement of the bearing
cups is necessary, remove the bearing cups
from the hub
Install Wheel Bearings
If the bearing cups were removed from the hub,
lower the temperature of the cups and use tool
group (A) to install them in the hub.