TM 5-3800-205-10-1
Table 1. Preventive Maintenance Checks and
Services (PMCS) for 613CS Scraper - Continued.
LOCATION
ITEM TO
CHECK/
ITEM
MAN-
NOT FULLY MISSION
SERVICE
NO.
INTERVAL
HOURS
PROCEDURE
CAPABLE IF:
a. Visually check tire for cuts or a. Tire has cuts or bulges in
19
Before
Front Wheel
tread or sidewall area or
and Tire
bulges in tread or sidewall area.
other damage that would
Check for uneven wear or uninfla-
impair operation.
tion. Look for stones or other for-
eign material embedded in tread or
sidewall area. Remove stones or
other foreign material if found.
b. Check for loose or missing studs, b. Missing wheel studs, lug
lug nuts, rim lock, and valve stem
nuts, rim lock or dam-
aged valve stem are
with cap.
noted.
c. Check for oil leaks from final drive c. Class III leaks are evi-
at wheel end.
dent.
20
Before
0.1 Hours Hydraulic
a. Visually check for damage or leaks. a. Class III leaks are evi-
Tank and
dent.
Sight Gage
b. Perform cold check of hydraulic oil
level. Oil must be visible in sight
gage.
WARNING
If machine is parked indoors, DO NOT run engine
unless exhaust fumes are vented to the outside.
Failure to follow this warning may cause injury or
death due to carbon monoxide.
c. If oil is not visible in sight gage,
start engine and move ejector for-
ward (WP 0005 00). Ensure bowl is
lowered. Shut down engine. Add
lubricating oil (Item 11 or 15, WP
until oil is visible in sight gage.
0014 00-15
