TM 5-3800-205-10-1
Table 1. Preventive Maintenance Checks and
Services (PMCS) for 613CS Scraper - Continued.
LOCATION
ITEM TO
ITEM
MAN-
CHECK/
NOT FULLY MISSION
NO.
INTERVAL
HOURS
SERVICE
PROCEDURE
CAPABLE IF:
58
After
0.1 Hours Transmis-
(3) Remove dipstick and check oil
(Con't)
sion Oil
level. Level should be within
Level Check
cross-hatched area, between
ADD and FULL marks, on dip-
stick.
(4) Add oil (Item 11, 15, 18 or 19,
WP 0026 00) as required
through filler opening. Do NOT
overfill. Reinstall fill cap.
Check that brake fluid reservoir, Any brake fluid leaks are
59
After
Brake Fluid
mounted inboard of tractor's right- evident.
Reservoir
side fender, is securely mounted with
no evidence of brake fluid leaks.
a. Visually check tire for cuts or a. Tire has cuts or bulges in
60
After
Front Wheel
tread or sidewall area or
and Tire
bulges in tread or sidewall area.
other damage that would
Check for uneven wear or underin-
impair operation.
flation. Look for stones or other for-
eign material embedded in tread or
sidewall area. Remove stones or
other foreign material if found.
b. Check for loose or missing wheel b. Missing wheel studs, lug
studs, lug nuts, rim lock, and valve
nuts, rim lock or dam-
stem with cap.
aged valve stem are
noted.
c. Check for oil leaks from final drive c. Class III oil leaks are evi-
at wheel end.
dent.
d. Check fender for damage.
61
After
0.1 Hours Hydraulic
a. Visually check for damage or leaks. a. Class III leaks are evi-
Tank Oil
dent.
Level Check
b. Perform hot check of hydraulic oil
level with ejector all the way for-
ward, bowl lowered to the ground,
engine idling, and hydraulic oil at
operating temperature. Oil level
must be above bottom line on sight
gage.
0014 00-42
