TM 5-3800-205-10-1
EXTERNAL AIR TRANSPORT BY CH-47 HELICOPTER - CONTINUED
0017 00
MACHINE DISASSEMBLY AND SECTIONALIZATION - CONTINUED
CENTER POST
RETAINER
TORQUE WRENCH
390-1455
CONTAINER
FENDERS
CENTER POST
Table 4. Stowage Instructions for ISU-60 Container - Two-Door End.
COMPONENT
STOWAGE INSTRUCTIONS
NOTE
Container center post must be removed to allow stowage of fenders. Remove
retainer and post.
Torque Wrench
1.
Place in cushion pad at back of shelf.
2.
Secure with three straps.
Fenders
1.
Place right fender in left-rear corner on floor of container.
2.
Place left fender as shown.
3.
Secure fenders with straps.
Container Center Post
1.
Position center post, installing bottom end first.
2.
Raise shelf slightly to lock center post in position.
3.
Install center post retainer and tighten.
CAUTION
Check to ensure all components are securely fastened prior to closing and
securing doors.
48.
Rig sling legs to ISU-60 container (FM 10-450-5). Container is now ready for hookup to CH-47 helicopter.
0017 00-38
