TM 5-3800-205-10-1
EXTERNAL AIR TRANSPORT BY CH-47 HELICOPTER - CONTINUED
0017 00
MACHINE ASSEMBLY - CONTINUED
25.
Wipe clean, then remove dust caps and connect three hydraulic lines at quick disconnect fittings on left side of draft
frame.
HYDRAULIC
LINES
QUICK
DISCONNECT
FITTINGS
DUST CAPS
26.
Remove four bolts, washers, and rear stability skid from transmission mount. Set rear stability skid and mounting
hardware aside for stowage in ISU-60 container. Reinstall transmission mount washers and bolts, stowed in con-
tainer toolbox, on each side of transmission mount. Tighten bolts to 375 lb-ft (508 Nm).
BOLTS AND WASHERS
REAR
STABILITY
SKID
CUTOUT ON
LEFT SIDE
0017 00-53
