TM 5-3800-205-10-1
AIR TRANSPORT BY C-130 AIRCRAFT - CONTINUED
0018 00
RETURN MACHINE TO OPERATIONAL CONFIGURATION - CONTINUED
WARNING
Use extreme caution when climbing on ladder. Failure to exercise caution may result in a fall, causing injury
to personnel.
h.
Place ladder against left side of scraper to access elevator motor mounting.
i.
Remove two bolts and cover with O-ring from speed reducer. Reinstall two bolts removed from cover to stowage
cup on rear deck of scraper. Return cover with O-ring to ISU-60 container toolbox.
BOLT
SPEED
REDUCER
COVER
WITH
O-RING
BOLT
390-1070
j.
Install elevator motor to speed reducer with two washers and bolts that were moved in step g. Tighten bolts to 158
lb-ft (214 Nm). Remove lifting device from elevator motor.
CAUTION
Always wipe ends clean prior to disconnecting hydraulic lines. Ensure ends are clean prior to reconnecting.
Failure to do so may introduce contamination into hydraulic system.
NOTE
All quick disconnect connections are made the same way. Be sure to turn quick disconnect collar a half turn
after connecting to lock connection.
k.
Remove dust caps and connect three hydraulic hose quick disconnects at elevator motor. Turn each quick discon-
nect collar a half turn after connecting to lock connection.
0018 00-54
